Factory Supply Wall-Mounted Plasma Air Sterilizer with Good Quality

Basic Info

Model NO.	HR-XDB-60
Electric Tension	220V
LCD Display	With LCD Display
Ultra High Temperature Alarm	Without Ultra High Temperature Alarm
Sterilization Information Recording and Printing	Without Sterilization Information Recording and Printing
Material	Carbon Steel
Installation	Wall-Mounted
Weight(Kg)	18
Nominal Air Delivery	600
Applicable Volume	60
Noise(dB(a))	55
Input Power(W)	55
Particulate Removal Rate	99.99%
Plasma Strength	8kv
Transport Package	International Standard
Specification	900380160mm
Origin	Shandong, China
HS Code	84192000
Production Capacity	1200 Pieces/Year

Product Description

Huirui series medical plasma air disinfectant products are mainly composed of fans, primary filters, and plasma module filters.Indoor polluted air is circulated through various disinfection and purification modules under the action of fans. The primary filter mainly filters large particles of dust such as hair and dust; the plasma module can effectively kill various bacteria, viruses, fungi and other pathogenic microorganisms in the air, and can effectively reduce the content of bacteria and viruses in the indoor air of medical institutions to prevent crossover Infect. It is an important measure to prevent hospital infection accidents.It needs to be equipped in the hospital, ICU, NICU, unclean operating room, delivery room, baby room, premature infant room, supply room, burn ward, hemodialysis center, treatment room, dispensing room, ward and other areas.Product Parameters

Specification model	HR-XDB-60
Appearance size(mm)	900380160
weight(kg)	18
Rated air volume(m³/h)	600
Applicable volume(m³)	≤60
Working hours(min)	≥60
power(w)	55
Service life	≈5 years

Modle	HR-XDB-60	Input power(W)	55
Installation	Wall-mounted	Anion concentrations(number/m³)≥	6×106
Overall dimensions(mm³)	900×380×160	Sterilization time(min)	60
Weight(kg)	18	Natural bacterial extinction rate≥	91.01%
Nominal air delivery(m³/h)	600	Bacterial killing rate≥	99.99%
Applicable volume (m³)	60	Particulate removal rate(0.5μm)>	99.99%
Noise(dB(A))	55	Plasma strength(V)	8000

Product features

Working principleMain reason: status.Air principle: Kill the air in the air by plasma.Air killer: It can kill common bacteria.

Medical plasma air sterilizer is mainly composed of fan, primary effect filter, high efficiency filter, plasma module and activated carbon molecular filter. Indoor polluted air circulates through various disinfection and purification modules under the action of fan. The primary effect filter and high efficiency filter mainly filter large particles of dust such as hair and dust.

Plasma module can effectively kill all kinds of bacteria, viruses, fungi and other pathogenic microorganisms in the air. Activated carbon molecular filter can effectively remove organic gases and various peculiar smell in the air; This series of products can effectively realize the disinfection effect of II, III disinfection environment in the hospital.Plasma air disinfection technology is a new type of air disinfection technology, which integrates ion sterilization technology and electrostatic dust removal technology.After continuous working for 60min, the extinction rate of natural bacteria in indoor air was higher than 90%.After continuous working for 60min, the killing rate of Staphylococcus albicans in the air of the aerosol chamber was higher than 99.90%;After continuous working for 60min, the purification efficiency of dust particles greater than or equal to 0.5um in indoor air is more than 90%, and the indoor air can reach the cleanliness level of 100,000.

Scope of useSuitable for air disinfection in medical and health institutions and public placesHow to useIn a confined space of no more than 60 minutes3, at room temperature, relative humidity no more than 80%, for more than 60 minutes, the air disinfection requirements can be met.Under the working condition of the machine, personnel can work and live indoors normally.

Equipment installationThis machine is a ceiling type, and the machine needs to be installed on the roof. The installation location should be firm, not susceptible to vibration, and enough to bear the weight of the unit; choose not to be close to the heat source and steam source, which will not cause obstacles to the air inlet and outlet of the unit Place; choose a place where the wind can be sent to every corner as much as possible; leave enough space near the machine.Product Pictures

Maintenance

1. Unplug the power plug before cleaning and maintenance.2. Do not make the electrical system damp when cleaning, so as to avoid accidents and malfunctions.3. Maintenance period

Parts	ycle		method
Parts	General occasion	Specially polluted occasions	method
Primary filter	12 months	6months	Open the lid, take it out and clean and replace
High efficiency filter	2 years	1 year	Please notify our company to send professionals to replace
Plasma generator	2 years	1 year	Please notify our company to send professionals to replace

The primary filter is a consumable material, which is not covered by the warranty, and the material cost is borne by the user.

Company Profile

Shandong Huirui Medical Technology is a wholly-owned subsidiary of Huirui (Shandong) Environmental Technology, one of the member units of laboratory construction and design in Shandong Province, and a high-tech enterprise specializing in laboratory construction. Design, construction, operation and maintenance of laboratories and purification-related products. The company was established in 2012, focusing on the laboratory and purification field for 9 years. Our company always adheres to the concept of "quality first, continuous innovation" to provide customers with safer, healthier, more energy-saving, more humane solutions and timely and thoughtful operation and maintenance services.We has owned more than 70 technical patents and software copyrights regarding the laboratory & purification industry and won multiple honorary titles, including "key pandemic control and prevention enterprise",etc.During the epidemic period in 2020 and 2021, our company immediately responded to the call of the Party and the country, and done our best to research, develop and produce the intergrated mobile container PCR laboratory, fever clinic, nucleic acid testing shelter and related products to response to the outbreak.

Our Advantages

Factory Supply Wall-Mounted Plasma Air Sterilizer with Good Quality

Packaging & Shipping

Factory Supply Wall-Mounted Plasma Air Sterilizer with Good Quality

FAQ

1.Why choose Huirui?We are the leading manufacturer in medical shelters like the interfrated mobile container PCR laboratory, nucleic acid testing shelter, etc, and other lab equipments, OEM & ODM service are offered.2. What payment terms do you accept?T/T, L/C ,D/A, D/P.3.How about your delivery time?Within 15-30 workdays after receiving deposit.4.What is the shipping port?FOB to Qingdao Port, China(also can ship according to customers' request).5.How to inspect the goods?Products will be checked by our QC staff first, then our project manager.Client can come and check by themselves or third party check is available.6.What's your warranty?One-year warranty period is provided.7. What should I do if I don't know how to use?Please do not worry, manual user will be sent together. We provide online training after-sale service, to make sure our customers can operate our instruments skillfully.