Wall Mounted Ozone & Plasma Air Purifier (SY-G009C-III)

Basic Info

Model NO.	SY-G009C-III
Power Source	AC Source
Operating Principle	Active
Purifying Technology	Ozone
Anion Density	>4000000pcs/m³
Transport Package	Gift Box/Carton
Specification	CE/UL/RoHS
Trademark	OCIC
Origin	China
HS Code	84212190
Production Capacity	80000PCS/Year

Product Description

Wall Mounted Ozone & Plasma Air Purifier (SY-G009C-III)

Brief Introduction
SY-G009C-III, is one of our new patented models desgined in 2017, with the Nano Ni Ti Alloy ceramic plate,
LED timer and 10000 hours life at least. To meet with the applications for medical, foods, brewing and beverage,
ward, office, school and etc. This model can kill or remove the virus, germ, fungus and smoking efficiently and
rapidly in full space.

Applications
It is widely used in the area of school, kindergarten, pharmacy, food, amusement, refrigeratory, dairy and
bathing...

Datasheet
Input: AC220V/50Hz; Power: 120W;
Ozone Output: 10g/h; Dimensions: 600×260×160mm;
Ozone Plate: 10g ×1(set) Weight: 7.50kg.

Installation
1, Check the package and parts with no problem and connect with the AC220V power.
2, Open the switch, press the red key ON/OFF, then the light ON; press the SETUP and set
timer by the + or -; each press to state 5 minutes, finally to press the ON to start the
machine.
3, The Ozone plate is generating the ozone neverless the temperature or air flow, even
the 150ºC the plate with normal working, but there will be some life breakage so you
must cool it by the air fan to keep it below 45ºC.
4, Remote control: press the ON/OFF and then SET to choose the PLASMA or OZONE,
then to press ON/OFF to start the machine. If you want to stop then press the ON/OFF.
5, If you can not smell the ozone or can not see the blue light on the plates that's to say
the ozone is not working. Generally the plate without any breakage has a very long life
so maybe the power get some problem.
6, Actually the plate has no difference on the positive or negative and you must connect
with the high frequency pulse to start it; donot connect with the AC220V directly; also
you need to clean dirty from the surface of the plates after some time.
7, You must clean the plates somewhere there is much dust timely.
8, This machine is fed by the ambient air so you donot need to connect with the oxygen
case; the ozone gas is very easily decomposed and usually the ozone will disappear half
an hour after it stops.
9, The machine is working without any second pollution or remains; it is normal to
interfere some other appliance because it is wroking at high frequency.

Graphic Diagram

Guarrantee
Thanks for choosing our products! We have a widely guarrantee for this model and we
promise to replace or repair for you during the 2 years period provided you run this
machine normally or according to the instructions, or we will ask for some cost price
with the cases below:
1, Cannot show us the guarrantee card; cannot install or run it normally to cause any
breakage;
2, Improper use, bad protection or disassembly arbitraily to cause any damage;
3, Damage caused by natural disasters (such as earthquakes, floods, etc.), external disasters
(such as fire, housing collapse) and so on;
4, Due to the change of the installation site, the failure or damage caused by the removal,
transportation and storage is improper or beyond the warranty period.

Product Information

Model
Lot No.
Guarrantee Period
Purchasing date
Contact Tel
Address

Quality Card
Name	Wall Mounted Ozone Air Purifier	Inspect
Model	SY-G009C-III	Date
Quality product, sales approval and 2 years guarrantee

Supplier: OEM Collecting Industrial Co.,LTD.

Website: http://oem-collect.en.made-in-china.com

Products

Wall Mounted Ozone & Plasma Air Purifier (SY-G009C-III)

Basic Info

Product Description